Fractional laser resurfacing treats only a fraction of the skin surface at a time, stimulating collagen with less downtime than fully ablative CO2 laser.
Medically reviewed by Steven Leibowitz, MD·Oculoplastic Surgeon·Last updated June 2026
Fractional laser resurfacing has become one of the most versatile tools in periocular skin rejuvenation, bridging the gap between the dramatic—but demanding—results of fully ablative laser and the gentle, incremental effect of topical treatments. Rather than removing the entire surface of the skin, a fractional laser treats only a fraction of the skin at any one time, leaving islands of untouched tissue between microscopic treatment zones. This architecture is the key to its appeal: it stimulates meaningful collagen remodeling while dramatically shortening the recovery period compared with traditional resurfacing.
For patients bothered by fine eyelid wrinkles, crow’s feet, crepey under-eye skin, sun damage, or the residual scars from a previous blepharoplasty, fractional resurfacing offers a tailored middle path. Understanding where it sits in the broader spectrum of laser technology—and how it compares to full CO2 laser resurfacing—helps patients set realistic expectations and choose the right approach for their skin and their tolerance for downtime.
Fractional lasers create microscopic columns of thermal injury surrounded by intact skin, which accelerates healing and reduces downtime.
Fractional vs Ablative vs Non-Ablative
Laser skin resurfacing exists on a spectrum defined by two questions: how much of the skin surface is treated, and whether the laser removes (ablates) tissue or heats it without vaporization. Understanding these two axes clarifies nearly every device on the market.
Ablative lasers vaporize the outer layers of skin. Fully ablative CO2 (10,600 nm) and erbium:YAG (2,940 nm) lasers remove the entire epidermis across the treatment area, producing the most powerful tightening and wrinkle reduction but requiring one to two weeks of intensive wound care and weeks to months of redness. Non-ablative lasers pass through the epidermis and deliver heat to the dermis without breaking the surface, stimulating collagen with almost no visible wound—but with correspondingly subtler results that require several sessions.
Fractional technology can be applied to either category. A fractional laser divides its beam into hundreds or thousands of tiny microthermal treatment zones, sparing the surrounding tissue. This creates a reservoir of healthy cells that migrate inward to heal each column rapidly.
Ablative Fractional
Vaporizes columns of tissue
Stronger collagen stimulation
Best for deeper lines & scars
Moderate downtime (3–7 days)
Often 1–2 sessions
Non-Ablative Fractional
Heats without removing tissue
Gentler, more subtle results
Best for fine lines & tone
Minimal downtime (1–3 days)
Typically 3–5 sessions
The single greatest advantage of fractional technology is controllable downtime. By adjusting density and depth, Dr. Leibowitz can dial treatment intensity up toward CO2-like results or down toward a lunch-hour refresh. Learn more about the full range of laser treatments used in oculoplastic practice.
Fractional Laser Devices
The fractional category includes a growing family of devices, each with a characteristic wavelength, ablation profile, and clinical niche. While brand names come and go, the underlying physics determines what each device can and cannot do around the eyes.
Fractional CO2 Lasers
Fractional CO2 devices (Fraxel Re:pair, Lumenis ActiveFX and DeepFX, and various UltraPulse platforms) combine the deep collagen-stimulating power of the 10,600 nm CO2 wavelength with the reduced downtime of fractional delivery. ActiveFX treats more superficially for tone and fine texture, while DeepFX drives narrow columns deeper into the dermis for wrinkles and scars—the two are frequently combined in a single session (“TotalFX”). Fractional CO2 remains the most powerful fractional option and produces results closest to fully ablative treatment.
Fractional Erbium Lasers
Erbium-based systems (fractional erbium:YAG devices at 2,940 nm and the Sciton Halo hybrid platform) offer excellent precision with slightly less residual thermal spread than CO2. The Sciton Halo notably combines an ablative and non-ablative wavelength in one pass, giving both surface renewal and deeper collagen effect with a favorable recovery profile that many patients find well-suited to the delicate periocular region.
Non-Ablative Fractional Lasers
Non-ablative fractional devices (Fraxel Restore 1550/1927 and Clear + Brilliant) heat the dermis through an intact epidermis. These are the mildest members of the family, ideal for early sun damage, pigment irregularity, and maintenance treatments. The 1927 nm thulium wavelength is particularly effective for superficial pigmentation and pre-cancerous actinic change, while Clear + Brilliant is marketed as an entry-level “preventive” treatment with minimal downtime.
Device Type
Wavelength
Best For
Typical Downtime
Fractional CO2 (Re:pair, DeepFX)
10,600 nm
Deeper lines, scars, laxity
5–7 days
Fractional Erbium (Sciton Halo)
1470 + 2940 nm
Tone, texture, moderate lines
3–5 days
Non-ablative (Fraxel Restore)
1550/1927 nm
Fine lines, pigment, sun damage
1–3 days
Clear + Brilliant
1440/1927 nm
Maintenance, early aging
1–2 days
Periocular Applications
The skin around the eyes is the thinnest on the body, which makes it both the first area to show aging and one of the most rewarding—and delicate—regions to treat. Fractional resurfacing is especially well matched to periocular concerns because its adjustable depth allows the surgeon to treat thin lower-lid skin safely while using more aggressive settings on the thicker crow’s-feet zone.
Fine lines and crow’s feet: Fractional resurfacing softens the etched-in lines at the lateral canthus that botulinum toxin alone cannot fully erase, because those static lines reflect true skin-quality change rather than muscle movement.
Under-eye crepiness: Thin, wrinkled lower-lid skin that persists even after fat has been addressed responds to the collagen tightening produced by fractional treatment.
Skin texture and pore quality: Overall smoothing and refinement of the cheek-eyelid junction.
Pigmentation and sun damage: Solar lentigines and dyschromia around the eyes and temples improve, particularly with 1927 nm non-ablative devices.
Post-blepharoplasty scar refinement: Fractional laser is an excellent tool for softening incision lines or improving residual texture months after eyelid surgery.
Fractional laser is one component of a broader skin rejuvenation strategy. For deeper structural laxity, energy-based tightening such as RF microneedling may complement or substitute for laser depending on skin type.
Recovery vs Full CO2
Recovery is where fractional resurfacing most clearly differentiates itself from fully ablative treatment. Because untreated skin surrounds each microthermal zone, re-epithelialization—the resurfacing of the skin barrier—happens in days rather than weeks.
After full CO2 laser resurfacing, patients typically face 7–14 days of open-wound care with oozing, crusting, and meticulous ointment application, followed by weeks to several months of pink or red skin that requires camouflage makeup. The tradeoff is a dramatic, often single-treatment result.
Fractional treatment substitutes multiple gentler sessions for one intense one. Expect the following general timeline, which varies by device intensity:
Days 1–3: Redness, swelling, and a sandpaper-like texture as the skin sheds treated micro-zones. Ablative fractional may involve pinpoint crusting.
Days 3–5: Bronzing and flaking (“MENDs,” or microscopic epidermal necrotic debris) clear. Makeup is usually possible.
Weeks 2–12: Ongoing collagen remodeling continues to improve texture and firmness.
Important: “Less downtime” does not mean “no downtime.” Strict sun avoidance and daily broad-spectrum SPF are mandatory for weeks after any resurfacing to prevent post-inflammatory hyperpigmentation, which can be persistent around the eyes.
Skin Type Safety
A patient’s Fitzpatrick skin type—a scale of skin pigmentation and sun response—is one of the most important factors in laser selection. Melanin absorbs laser energy, so darker skin types carry a higher risk of post-inflammatory hyperpigmentation (PIH) and, less commonly, hypopigmentation.
Fractional technology partially mitigates this risk because the surrounding untreated skin helps the treated zones heal without triggering as much pigment reaction as fully ablative treatment. Nevertheless, careful device selection matters:
Fitzpatrick I–III (lighter skin): Tolerate the full range of fractional devices, including fractional CO2, with relatively low PIH risk.
Fitzpatrick IV: Best served by non-ablative fractional devices at conservative settings, often with pre- and post-treatment pigment-suppressing regimens.
Fitzpatrick V–VI (darker skin): Ablative resurfacing carries significant pigment risk; non-ablative fractional (especially 1550 nm) at low density is preferred, and energy-based alternatives such as microneedling are frequently safer choices.
Important: A history of cold sores (herpes simplex) requires antiviral prophylaxis before periocular resurfacing, as laser injury can trigger a widespread outbreak. Active infection, isotretinoin use within the prior 6–12 months, and a tendency toward keloid scarring are additional considerations Dr. Leibowitz will review.
Combination with Blepharoplasty
One of the most common questions patients ask is whether fractional laser can be performed at the same time as eyelid surgery. The answer is a qualified yes—and the nuances matter for both safety and results.
Skin resurfacing and lower eyelid blepharoplasty address different problems: surgery removes or repositions excess skin and fat, while laser improves the quality of the skin that remains—its fine wrinkling, texture, and elasticity. Combining them can deliver a more complete rejuvenation than either alone.
However, when skin is being simultaneously undermined surgically and resurfaced with an ablative laser, blood supply to that skin can be compromised, raising the risk of delayed healing or lower-lid retraction. For this reason, many surgeons:
Prefer a transconjunctival (incision-inside-the-lid) lower blepharoplasty when combining with full-strength lower-lid resurfacing, since the skin is left uncut and its blood supply intact.
Use lighter fractional settings over surgically manipulated skin, reserving deeper treatment for uninvolved areas such as the crow’s feet and cheeks.
Sometimes stage the treatments, performing laser resurfacing several weeks to months after surgery once healing is complete—an approach that also lets the surgeon refine any residual incision scars.
For patients weighing surgery against energy-based options, our comparison of non-surgical eye lift techniques explains where laser fits versus what only surgery can accomplish.
Realistic Outcomes
Honesty about outcomes is essential to patient satisfaction, and this is where fractional resurfacing must be positioned carefully against full CO2 treatment.
Fractional resurfacing produces gradual, cumulative improvement. A single non-ablative session yields a modest brightening and texture change; a series of three to five sessions builds meaningful improvement in fine lines, tone, and skin quality. Fractional CO2 delivers more per session and can approach—but not fully equal—the wrinkle reduction and tightening of fully ablative CO2. In head-to-head terms, fully ablative CO2 remains the gold standard for the deepest periocular wrinkles and the most significant skin tightening, at the cost of substantially longer recovery.
Reasonable expectations include:
Smoother texture and softening of fine lines—not complete erasure of deep, static folds.
More even tone and reduced sun-related pigment.
A subtle, natural tightening rather than the dramatic resurfaced look of full ablation.
Results that continue to improve over three to six months as collagen remodels, and that require sun protection and occasional maintenance to sustain.
Importantly, no laser corrects excess eyelid skin (dermatochalasis), herniated fat pads, or true lid laxity. Patients with those anatomic problems will be better served—or complemented—by upper eyelid blepharoplasty or a formal lower-lid procedure. A thorough consultation distinguishes skin-quality concerns (a laser problem) from structural concerns (a surgical problem).
Typical result after a series of fractional treatments: smoother texture and softened fine lines with preserved natural expression.
Choosing between fractional and fully ablative resurfacing—and choosing the right device for your skin type—requires the judgment of a physician who understands both the laser physics and the delicate anatomy of the eyelids and orbit. An ASOPRS fellowship-trained oculoplastic surgeon is uniquely qualified to treat the periocular region safely, balancing cosmetic goals against the functional protection of the eye. If you are considering laser skin rejuvenation around your eyes, find a qualified oculoplastic surgeon near you to discuss which approach best fits your skin, your concerns, and your tolerance for downtime.
Frequently Asked Questions
Who is a good candidate for fractional laser resurfacing?
Ideal candidates are those with mild to moderate skin concerns such as fine lines, sun damage, acne scars, or uneven texture who want improvement without extensive downtime. Generally, candidates should have realistic expectations, good overall health, and the ability to follow post-treatment sun protection guidelines. Those with active skin infections, certain medical conditions, or very deep wrinkles may need alternative treatments. A consultation with a fellowship-trained oculoplastic surgeon can determine if this procedure is right for your specific concerns.
What should I expect during my initial consultation?
During your consultation, the surgeon will evaluate your skin condition, discuss your aesthetic goals, and review your medical history and medications. They will explain how fractional laser resurfacing works, what results you can realistically expect, and any risks or limitations specific to your situation. Before and after photos of similar cases may be shown to help set appropriate expectations. You'll also receive information about pre-treatment preparation and post-treatment care requirements.
How does fractional laser resurfacing actually work?
Fractional laser technology creates thousands of tiny treatment zones while leaving surrounding skin untouched, which stimulates the body's natural healing response and collagen production. This fractional approach allows the skin to heal more quickly compared to fully ablative treatments that treat the entire surface. The controlled injury prompts remodeling of old, damaged collagen and reveals fresher skin underneath. Multiple treatment sessions are often recommended for optimal results.
What are the potential risks and complications of this procedure?
Common temporary side effects include redness, swelling, and mild discomfort that typically resolve within days to weeks. Less common risks may include temporary changes in skin pigmentation, infection if post-care instructions aren't followed, or rarely, scarring. Those with darker skin types or certain conditions may have a higher risk of pigmentation changes. Dr. Leibowitz will discuss these risks in detail and explain how they minimize complications through proper technique and patient selection.
Your Surgeon
Steven Leibowitz, MD
Cosmetic and Reconstructive Surgery of Eyelids, Orbits, and Tear Ducts
How long do results last, and will I need repeat treatments?
Results from fractional laser resurfacing continue to improve over several months as collagen remodeling occurs, with benefits typically lasting 1-2 years or longer depending on skin quality and sun exposure. While the procedure cannot stop aging, it significantly improves skin texture and appearance. Some patients choose maintenance treatments every 1-2 years to sustain results, while others may only need occasional touch-ups. The longevity of results depends on your skincare routine, sun protection, and individual aging factors.
What does the post-treatment recovery process involve?
Most patients experience mild redness and swelling for 3-7 days, with some peeling or flaking occurring in the following weeks as the skin heals. You'll need to keep the treated area clean, apply prescribed healing ointments, and avoid direct sun exposure with strict sunscreen use. Most people can return to light activities and non-makeup work within a few days, though strenuous exercise should be avoided for at least a week. Following Dr. Leibowitz's specific post-care instructions is essential for optimal healing and results.
When should I see an oculoplastic surgeon instead of other skin specialists?
Oculoplastic surgeons are specially trained in delicate periocular and facial anatomy, making them ideal for treating sensitive areas around the eyes where precision is critical. If you have concerns around the eyelids, under-eye area, or complex facial rejuvenation combined with eye concerns, a fellowship-trained oculoplastic surgeon is your best choice. They combine surgical expertise with aesthetic knowledge and understand how eyelid and facial treatments affect vision and eye health. Your primary care doctor can refer you to an ASOPRS (American Society of Ophthalmic Plastic and Reconstructive Surgery) fellowship-trained specialist.